AL-ARM 450 F


Manual Welding Laser AL-ARM 450 F

The AL-ARM laser system enables quick and flexible vehicle body repairs on pores,
bleed-throughs, and offset seams.
In molding, you can weld directly in the press or milling tool – without any setup time.

The AL-ARM is different:

With this welding laser, the welding process is monitored through 2D visualization instead of customary microscope attachments. This is realized via (pass-through) 2D laser protection goggles, which allow you to keep an eye on the environment and the welding task at the same time. The welding area is augmented and the process-relevant data, such as the cross-hairs, are displayed directly.

This laser system has no resonator, but instead a handset with automated wire feeding for wire thicknesses up to 0.6 mm. The wire is fed automatically. A new feature is that the system can now be operated with the ALPHA LASER wire feed AL-DV. This allows you to feed wire endlessly from the wire spool. The handpiece weighs just 1.5 kg and is connected to the supply unit via a 3.5 m long energy chain (optionally 9 m).

It is easy to handle and very flexible during operation. The welding seam width can be variably adjusted during the welding process.

A lot of emphasis was placed on safety: Integrated workpiece detection ensures that welding is only allowed when the handset touches the workpiece. This prevents uncontrolled laser radiation emissions. The safety concept verified by TÜV for compliance with the high safety requirements for performance level d is included.

Give the AL-ARM 450 F a Try.
Let Us Show You the Many Possibilities.

  • AL-ARM 450 F
    • Laser
      Laser type / wavelengthFiber laser, 1070 nm
      Average power450 W
      CW output450 W
      Peak pulse power4500 W
      Pulse energy45 J
      Pulse duration0.2 ms – CW
      Pulse frequencySingle pulse – 100 Hz
      Electrical connection1-phase, 16 A
      Operating modesPulsed/CW
      Welding spot Ø0.2–3.0 mm
      Focal distance120 mm
      Pulse shapingAdjustability of power curve within a laser pulse
      Energy chain length3.5 m (optional 9 m)
    • External dimensions
      W × D × H550 x 600 × 1200 mm (height with swivel arm: 2000 mm)
      Weight AL 450 F120 kg
      Handset weight1.5 kg
  • Download data sheet

Technical accessories

Manipulator table with ALPHA LASER quick-clamping system

for quick and safe clamping of the workpiece.

Monitor + HDMI cable

for two-dimensional representation of the welding process. The 3D laser protection goggles and monitor can be operated simultaneously.

Subscribe to newsletter
+49 (0)89 890237-0
Contact form